Fujikura FSM-60R12 Fusion Splicer

Fujikura FSM-60R12 Fusion Splicer

A brief description of Fujikura FSM-60R12

The new FSM-60R12 Fusion Splicer is Mass Ribbon Fusion Splicer’s leading-edge features, including unprecedented size, weight, and ruggedness, make it the first core-alignment splicer truly optimized for field use, including FTTH applications. Automation such as calibration-free arc (with AUTO splice mode), automatic fiber identification and reduced operational steps, provides ease of use. In addition, the Fujikura FSM-60R12 Fusion Splicer Mass offers increased flexibility with user selectable front or top monitor positioning. The Fujikura FSM-60R12 Mass splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds.

The Fujikura FSM-60R Fusion Splicer offers unmatched versatility and reliability. The new ribbon splicer withstands a drop test of up to 30” and continues to splice. And enhanced, robust features enable the Fujikura FSM-60R to resist shock, dust, and rain so that unfortunate environmental conditions do not negatively impact productivity.

Equipped with a user-friendly interface and precision fixed V-groove, the FSM-60R12 offers 2 to 12 fiber ribbon splicing, as well as, single fiber splicing capability. Automated features such as auto-start splicing, auto-start tube heater operation, automatic ribbon fiber identification, and auto-arc calibration reduce operational steps and improve splicing performance. Additional improvements include automatic image orientation when switching the dual position monitor, a large capacity battery option and the ability to charge the battery during splicer operation.

New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Features:

• Automatic core to core, low-loss splicing regardless of fiber quality or age
• 9 second splicing time
• 35 second heat time
• Wind protector design withstands 30 mph cross wind
• User selectable monitor position
• Excellent visibility in bright sunlight with 5.6″ TFT Color LCD display
• Multiple pre-programmed modes for specialized splicing
• Optional data download kit to connect splicer to PC

Specification:

PARAMETER	VALUE
Model	FSM-60s Fusion Splicer	FSM-70s Fusion Splicer	FSM-80s Fusion Splicer
Applicable Fibers	SMF(ITU-TG.652),MMF(ITU-TG.651).DSF(ITU-TG.653),NZDSF(ITU-TG.655),BIF(ITU-T657)
Cladding Diameter	80mm to 150mm
Coating Diameter	100mm to 1000mm
Fiber Cleave Length	8mm to 16mm	5mm to 16mm	5mm to 16mm
Typical Average  Splice Loss	0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with  NZDS;
Splicing Time	Typical 9 seconds with standard single-mode fiber	SM Fast-mode:7 seconds;SM Auto-mode:10seconds;AUTO-mode:15 seconds with SM fiber	Typical 7 seconds with SM;Typical 14 seconds with FP-03(60mm)sleeve
Arc Calibration  Method	Automatic, real-time by using results of previous splice when in  AUTO mode; manual arc calibration function available
Splicing Modes	100 preset and user programmable modes
Splice Loss Estimate	Based upon dual camera cladding alignment data
Storage of Splice Result	Last 2000 splice results stored in the internal memory
Fiber Display	X or Y, or both X and Y simultaneously; front or rear monitor display  options with automatic image orientation
Magnification	35X to 90X
Viewing Method	Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
Operating Condition	0 to 5000 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
Mechanical Proof Test	1.96 to 2.25 N
Tube Heater	Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time	Typical 30 seconds with FP-03 sleeve,35 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves	Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves	Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length	60 mm, 40 mm, Micro
Splice/Heat Cycles with Battery	Typical 160 cycles with power save functions activated	Typical 200 cycles with power save functions activated	Typical 200~240 cycles with power save functions activated
Electrode Life	1,500 Arc Discharges	3,000 Arc Discharges	3,000 Arc Discharges
Power Supply	Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery
Terminals	USB 1.1 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03
Wind Protection	Maximum wind velocity of 15m/s (34 mph)
Dimensions	136 W x 161 D x 143 H (mm) / 5.3 W x 6.3 D x 5.6H (inches)	146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)	146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)
Weight	2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with battery	2.5 kg (5.5 lbs) with AC adapter; 2.7 kg (5.9 lbs) with battery	2.5 kg (5.5 lbs) with AC adapter; 2.7 kg (5.9 lbs) with battery

View: www.fibercasa.com or cs04fibercasa.blogspot.com

for more information

Or you can buy it now