2015年5月22日星期五

XFP Transceiver Module

Description

XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths of 850 nm, 1310 nm or 1550nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fiber Channel, SONET / OC-192 rates, SDH / STM-64, 10 Gbit/s Optical Transport Network ( OTN ) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard. XFP modules use an LC fiber connector type to achieve high density.

Transceiver for CWDM, DWDM, PON, and BIDI devices are all available here. Also, the Transceiver Module we offer, has a great compatibility which ensure our can be compatible with all the major device provider like Cisco, HP, Juniper, Huawei, Nortel, Extreme, etc.



Feature
  • Hot pluggable
  • Support 9,95 Gb/s to 11.1 Gb/s bit rates
  • XFP MSA package with duplex LC connector
  • DDMI ( digital diagnostic monitor interface ) function integrated
  • Ver low EMI and excellent ESD protection
  • +3.3V single power supply
  • Less than 3.5W power dissipation
  • With pull de-latch
  • Transmission distance up to 40km with 9/125μm SMF
  • -5~70℃ case operate temperature range
  • No reference clock requirement 
  • Complies with RoHS directive ( 2002/95/EC )
Application
  • SDH/SONET
  • SAN ( Stroage Area Network )
  • 10G Fiber Chanel
  • CWDM System
  • DWDM System
  • 10GE ( 10000Base Ethernet )
  • 10G OTN ( Optical Transport )
Dual Ports XFP Transceiver Module
The most common type of XFP Module, widely used in SDH/SONET, 10000Base Ethernet and 10G Fiber Channel 10G OTN ( Optical Transport ).
Fibercasa provides 300m~120km all range XFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And all the transceivers Fibercasa offers are with a DDMI function.



Single Port BIDI XFP Transceiver Module
Single port BIDI XFP Module has the ability to couple Tx and Rx signals in one fiber, so it only need one port. But this technique also requires the wavelengths of Tx and Rx used on the corresponding end is exactly reverse to it. For example, if we use Tx 1310nm / Rx 1550nm on one side, we must use Tx 1550nm / Rx 1310nm on the other side.
So, as the features statemented above, we only offer the products as a pair which means the BIDI XFP is provided 2pcs as a pair to reduce the risk of incompatible between two BIDI Module.
Fibercasa provides 300m~120km all range XFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And all the transceivers Fibercasa offers are with a DDMI function.


CWDM  XFP Transceiver Module
CWDM XFP Module is commonly used in a Coarse Wavelength Division Multiplexing system. Fibercasa Offers all 18 channels CWDM SFP Module which the center wavelength is from 1270 to 1610 with each channel spacing of 20nm.
Consider the attenuation features of the early G.652 Fiber in 1270 to 1470 band, 1470 to 1610 CWDM SFP Modules are more recommended ( this problem is solved on newer G.652D and G.657 fiber )
Fibercasa provides 300m~120km all range XFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And all the transceivers Fibercasa offers are with a DDMI function.

Note: CXX is the Channel Wavelength Mark.Here,CXX can be C27-C61

DWDM XFP Transceiver Module
DWDM XFP Module is commonly used in a Dense Wavelength Division Multiplexing system. Fibercasa Offers 100Ghz DWDM XFP Module.
Then DWDM Module channels are divided by transmission frequency. Usually it's from 191.7THz to 196.1THz and each channel is divided by 100GHz
Fibercasa provides 300m~120km all range XFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And all the transceivers Fibercasa offers are with a DDMI function.

Note: DXX is the Channel Frequency Mark.Here,DXX can be D17-D61

View: www.fibercasa.com  for more information







没有评论:

发表评论