The SFP Transceiver Module

SFP Transceiver Module

Description

Fibercasa provides high performance SFP Transceiver Module. The optical transceiver is compliant with the Small Form-factor Pluggable ( SFP ) Transceiver Multi Source Agreement ( MSA ) and SFF-8472. It offers previously unavailable system cost, upgrade, and reliability benefits by virtue of being hot-pluggable.

Transceiver for CWDM, DWDM, PON, and BIDI devices are all available here. Also, the Transceiver Module we offer, has a great compatibility which ensure our can be compatible with all the major device provider like Cisco, HP, Juniper, Huawei, Nortel, Extreme, etc.

Feature

• Compliant with SFP MSA and SFF-8472 with dual LC receptacle or single LC receptacle ( BIDI )
• Hot-pluggable
• Metal enclosure for lower EMI
• +3.3V Single power supply
• Qualified to meet the intent of Bellcore reliability practices
• LVPECL logic interface simplifies interface to external circuitry
• LVTTL logic level RX LOS
• 9/125 μm SMF
• 0~70℃ Case Operate Temperature Range
• Complies with RoHS directive ( 2002/95/EC ) 

Application

• SDH/SONET
• SAN ( Stroage Areal Network )
• Fiber Channel
• CWDM System
• DWDM System
• FE ( Fast Ethernet/100Base Ethernet ), GE ( 1000Base Ethernet ), 10GE (10000Base Ethernet )
• PON ( Passive Optical Network )

Dual Ports SFP Transceiver Module

The most common type of SFP Module, widely used in SDH/SONET, 100Base Ethernet, 1000Base Ethernet and Fiber Channel.

Fibercasa provides 300m~120km all range SFP Module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And all the transceiver Fibercasa offers are with a DDMI fuction.

Single Port BIDI SFP Transceiver Module

Single port BIDI SFP Module has the ability to couple Tx and Rx signals in one fiber, so it only need one port. But this technique also requires the wavelengths of Tx and Rx used on the corresponding end is exactly reverse to it. For example, if we use Tx 1310nm / Rx 1550nm on one side, we must use Tx 1550nm / Rx 1310nm on the other side. So, as the features statemented above, we only offer the products as a pair which means the BIDI SFP is provide 2pcs as a pair to reduce the risk of incompatible between two BIDI Module.

Fibercasa provides 300m~120km all range SFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PIN and APD receivers. And the transceivers Fibercasa offers are with a DDMI function.

CWDM SFP Transceiver Module

CWDM SFP Module is commonly used in a Coarse Wavelength Division Multiplexing system. Fibercasa offers all 18 channels CWDM SFP Module which the center wavelength is from 1270 to 1610 with each channel spacing of 20nm.

Consider the attenuation features of the early G.652 Fiber in 1270 to 1470 band, 1470 to 1610 CWDM SFP Modules are more recommended ( this problem is solved on newer G.652D and G.657 fiber )

Fibercasa provides 300m~120km all range SFP module. To the different detection and transmission requirements, we offers VCSEL, FP, DFB, EML laser transmitters as welll PIN and APD receivers. And all the transceivers Fibercasa offers are with a DDMI function.

Note: CXX is the Channel-Wavelength Mark. Here, CXX can be C47, C49, C51, C53, C55, C57, C59, C61

View: www.fibercasa.com  for more information