显示标签为“OTDR”的博文。显示所有博文
显示标签为“OTDR”的博文。显示所有博文

2015年8月16日星期日

Fluke Multimode OTDR for troubleshooting and extended certification – 1

Fluke Multi-mode OTDR Introduction

Many OTDRs (Optical Time Domain Reflectometers) used for fiber troubleshooting are designed for carriers and contain cumbersome and complicated features that enterprise users don’t need. Few OTDRs are built with features and usability for enterprise network engineers, SAN designers and cable installers.
As enterprises consume more storage resources and adopt higher bandwidth (40G, 100G) data center architectures,
Fluke Multimode OTDR
Fluke Multimode OTDR
the resilience of the cabling infrastructure becomes highly dependent upon maintenance tools to ensure fiber reliability. OptiFiber Pro is the industry’s first purpose-built OTDR that meets the unique challenges of an enterprise fiber infrastructure. With its simple smartphone user interface and powerful feature set, the OptiFiber Pro turns anyone into an efficient and expert premise fiber troubleshooter or installer.
This Multi-mode OTDR with 850nm & 1300nm wavelengths, eliminates errors that occur when testing fiber and features ultra-short dead zones.
Kit includes AC adapter, USB interface cable, user guide and CD, Link Ware software, 2-SC/LC & 1-SC/SC launch cables, fiber inspection probe, 2-launch fiber tool packs, 1.25 & 2.5mm One Click cleaners and carrying case & strap.
Fluke Multimode OTDR Features
Extremely short event and attenuation dead zone, The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich data center and storage area environments.
Two second trace per wavelength Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap event, Table or Trace. The end result is less time spent testing and more time performing other tasks.
DataCenter OTDR™ mode With a simple one-touch selection, users enter DataCenter OTDR mode – without setup time for fine tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters –end-detection algorithms, pulse widths, etc – without getting confused by the short links or number of connectors.
Graphical EventMap™ view To eliminate the learning curve associated with reading an OTDR trace, OptiFiber Pro’s advance logic automatically interprets the information to create a detailed and graphical map of events that includes connectors, splices and anomalies. To accommodate different preferences, users can easily switch between the EventMap, the Event Table and the Trace for test details. Any faulty events will be highlighted with RED icons to facilitate quick troubleshooting.
Dynamic project and user profile management OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project – defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.
On-screen help – corrective action On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.
FiberInspector™ probe OptiFiber Pro’s video inspection system examines patch cords and patch panel bulkheads to avoid the number one cause of fiber link failure – contamination. Significant time is saved because the probe is inserted directly into the patch panel’s bulkhead to examine installed fiber terminations without disassembling the patch panel. Technicians assign a pass or fail grade to the fiber, append a comment and save it for use in certification reports.

View: www.fibercasa.com or www.fiber-optic-fusion-splicer.com
for more information

2015年4月21日星期二

How to Test Fiber Optic Cable by OTDR

OTDR, full name of which is optica time-domain reflectometer is one of the most popular method of testing the light loss in the cable plant. In most circumstance, it also indicate an fiber optic testing instrument to characterized the optical fibers. OTDRs are always used on OSP cables to verify splicing loss or locating damages to the fiber optic cables. Due to the decline in the OTDR price over recent years, it is more and more applied by technicians for the system installation process.

OTDR uses backscattered light of the fiber to imply loss, which is an indirect measurement of the fiber. OTDR works by sending a high power laser light source pulse down the fiber and looking for return signals from backscattered light in the fiber itself or reflected light from connectors or splice interface.

OTDR testing requires a launch cable for the instrument to settle down after reflections from the high powered test pulse overloads the instrument. OTDRs can either use one launch cable or a launch cable with a receive cable, the tester result of each is also different.

Test With Launch Cable Only

A long launch cable allows the OTDR to settle down after the initial pulse and provides a referencecable for testing the first connector on the cable. When testing with an OTDR using only the launch cable, the trace will show the launch cable, the connection to the cable under test with a peak from the reflectance from the connection, the under testing cable and likely a reflection from the far end if it is teminated or cleaved. Most terminations will show reflectance that helps identify the ends of the cable.

By this method, it can not test the connector on the far end of the under testing cabled since it is not connected to another connector, and connection to a reference connector is necessary to make a connection loss measurement.

Test With Launch And Receive Cable

By placing a receive cable at the far end of the under testing cable, the OTDR can measure the loss of all factors along the cable plant no matter the connector, the fiber of cables, and other connections or splices in the cable under test. Most OTDRs have a least squares test method that can substract on the cable included in the measurement of every single connector, but keep in mind, this may not workable when the tested cable is with two end.

During the process you should always keep in mind to start with the OTDR set for the shortest pulse width for best resolution and a range at least twice the length of the cable you are testing. Make an initial trace and see how you need to change the parameters to get better results.

OTDRs can used to detect almost any problems in the cable plant caused during the installation. If the fiber of the cable is broken, or if any excessive stress is placed on the cable, it will show up the end of the fire much shorter than the cable or a high loss splice at the problem locations.

Except OTDR testing, the source and optical power meter method is another measurement which will test the loss of the fiber optic cable plant directly. The source and meter duplicate the transmitter and receiver of the fiber optic transmission link, so the measurement correlates well with actual system loss.


                   View: www.fibercasa.com for more information

2015年4月16日星期四

Fibercasa

Fibercasa founded in 2012. is a leading enterprise professionally engaged in the service of optical fibre assessing and networking. It is also one of the biggest national suppliers for optical communication meters and equipments. The products enjoy a worldwide reputation.


As an e-commerce company in the optical fibre, Fibercasa has been in the industry for more than 19 years. We have high standard in product manufacturing and foreign trade; and has accumulated ample logistical experience in international transportation. We aim to provide our customers with the product they need in a most competitive price.

What Fibercasa Offer                                         Categories          
  • PON design and construction of the related products.                 OTDR                
  • PON maintenance and related services.                                      Fusion splicer
  • FTTx ODN distribution solution.                                                   Power meter
  • Optical component inspection and related products.                   SFP Transceiver
Mini OTDR Introduction Fibercasa mini OTDR (Optical Time                   
Domain Reflectometer) is the new generation of intelligent            
 meter for the detection of fiber communications systems              
 after FCOT2000 series. With the popularize of optical                    
network construction in cities and countrysides, the 
measurement of optical network became short and
 disperse, This Mini OTDR is specially designed for that…

Mini OTDRs

Introduction to Mini OTDRs The latest developments
 in OTDRs in the widespread availability of small,
 battery-operated units that offer similar capabilities
 (and sometimes MORE) which previously could only
 be found in full sized models. The only limitation of a
 Mini is the lack of a built-in printer. This is offset by the 
good long-range and… Read More »



About us

Fibercasa.comLtd
6f, Building 13, No.99 Tianzhou Road
Tel: 86-21-54451216

Web: http://www.fibercasa.com