2015年4月23日星期四

A comparative analysis of the advantages and disadvantages of laser light and LED light source

Every technological advances and breakthroughs will change the competitive landscape of an industry fundamentally. This is also a great time to those living on later, it is necessary to see who can seize this opportunity.

DLP viedo wall market has been in a relatively stable pattern of competition, among which of a very important reason, is the product of technology has not changed much. This situation in 2010 began to be broken, because the LED light source technology alternative UHP sources, and gradually become the industry mainstream technology. In this alternative process, some manufacturers quickly followed up vigorously into new product development and promotion of light, quick to seize the opportunity to establish a competitive advantage. Conversely, some manufacturers will have new technology on the sidelines, the follow up is slow, the results of the loss of opportunity, when new technologies and new products a strong impact on the market, in the passive state. Thus, the market competition also will be changed dramatically. In this alternative UHP LED light source changes, the most representative is in the shift up and Granville. Year (2009) in DLP sales up more than two million sales of less than 3 million, but Vtron is already close to 11 million can ( only DLP ). Such an outcome quite a relationship with both the switching speed and the promotion of investment in the LED lighting products. Today, Chong Wei basically no longer sell products UHP light source, while the contrary, UHP light products still occupies a considerable share in the sales volume up.

 Laser light source color gamut

Now, the mew technological changes came before us, since the laser light source products in Infocomm2012 debut, just a short time, sales of laser light projection of the movement has been nearly a thousand units. Former investment market, laser light projector products is wind the crane, including Mitsubishi, LG, including many heavyweights has introduced a laser light source products. Faced with menacing laser light of new techonlogies, we can not help but ask, laser light can really replace the LED light source it ? Really will become the future mainstream technology? 

Let's compare the laser light source and LED light source respective strenghts and weaknesses, the answer of course will be announced.

First, from the luminance of view. LED light source currently there are still hard to improve the plight of brightness. Even with 3 * 6 LED light source chip set, but only reached brightness 1100ANSI lumens. To continue to improve the brightness, or using more light chip set; or using more powerful chips. However, no matter what solution, undoubtedly increases the probability of either a failure of the light source, increasing the difficulty of movement or heat, while also increasing the power consumption of the movement. By contrast, the laser light source, the realization of high brightness can say easy. At present, the laser light source has been able to achieve up to 30000ANSI brightness light peak Shenzhen Optoelectronic laser source movement, for example, it has matured production 4000ANSI movement, so the brightness of the LED light source is concerned, is still unthinkable.

Second, power and energy efficiency. LED light source movement power greater than 300W, and the movement of the laser light source consumes only 130W. EER LED light source only 3.5LM / W, while the laser light energy efficiency up to 12LM / W. Single movement that, if applied in multiple large-scale display system, one can say that the difference between heaven and an underground. In today's global focus on eco-friendly trend, practice makes lead the future, self-evident.
   
                    View : www.fibercasa.com for more information


2015年4月22日星期三

Difference between SFP, SFP+ and XFP

Difference between SFP, SFP+ and XFP

SFP, SFP+ and XFP, all refer to a type of transceiver that is plugged into a special port on a switch or to some network device. These transceivers are used in the field of telecommunication and data communication. XFP stands for 10 gigabit small form factor pluggable. They usually operate at optical wavelengths (colors) of 850nm, 1310nm or 1550nm. XFP complies with the agreement known as XFP MSA agreement. SFP protocol specifications are based on IEEE802.3, SFF-8472. SFP+ modules are smaller than XFP. SFP+ fiber optic transceivers comply with the protocol based on IEEE 802.3ae, SFF-8431 and SFF-8432.

XFP (10 Gigabit Small Form Factor Pluggable) is a standard for the transceivers. This type of transceiver is not dependent on the protocol. Generally, it operates at optical wavelenghts corresponding to 850nm, 1310nm or 1550nm. The modules belonging to the XFP are hot swappable which means that the function of replacing the computer system components can be performed without shutting down the system. The specifications of XPF were developed by the XFP Multi Source Agreement Group.


SFP stands for “Small Form-factor Pluggable.” It is most often used for Fast Ethernet of Gigabit Ethernet applications. They are capable of supporting speeds upto 4.25 Gbps. It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable. It is specified by the SFP transceiver multi-source agreement.

SFP+ can be referred to as an expansion of the SFP standard. It has the capability to support speeds of 10 Gbps or even higher over fiber. The SFP+ product family includes cages, connectors, and copper cable assemblies. It is also similar to the performance requirements of SFF-8431 and also supports 8G Fiber Channel and 10G Ethernet applications. SPF+ comes with various advantages. It is a more compact factor package than compared to that of XFP. The cost of SFP+ is also less than that to the XFP.
   
               View: www.fibercasa.com for more information

2015年4月21日星期二

How to Test Fiber Optic Cable by OTDR

OTDR, full name of which is optica time-domain reflectometer is one of the most popular method of testing the light loss in the cable plant. In most circumstance, it also indicate an fiber optic testing instrument to characterized the optical fibers. OTDRs are always used on OSP cables to verify splicing loss or locating damages to the fiber optic cables. Due to the decline in the OTDR price over recent years, it is more and more applied by technicians for the system installation process.

OTDR uses backscattered light of the fiber to imply loss, which is an indirect measurement of the fiber. OTDR works by sending a high power laser light source pulse down the fiber and looking for return signals from backscattered light in the fiber itself or reflected light from connectors or splice interface.

OTDR testing requires a launch cable for the instrument to settle down after reflections from the high powered test pulse overloads the instrument. OTDRs can either use one launch cable or a launch cable with a receive cable, the tester result of each is also different.

Test With Launch Cable Only

A long launch cable allows the OTDR to settle down after the initial pulse and provides a referencecable for testing the first connector on the cable. When testing with an OTDR using only the launch cable, the trace will show the launch cable, the connection to the cable under test with a peak from the reflectance from the connection, the under testing cable and likely a reflection from the far end if it is teminated or cleaved. Most terminations will show reflectance that helps identify the ends of the cable.

By this method, it can not test the connector on the far end of the under testing cabled since it is not connected to another connector, and connection to a reference connector is necessary to make a connection loss measurement.

Test With Launch And Receive Cable

By placing a receive cable at the far end of the under testing cable, the OTDR can measure the loss of all factors along the cable plant no matter the connector, the fiber of cables, and other connections or splices in the cable under test. Most OTDRs have a least squares test method that can substract on the cable included in the measurement of every single connector, but keep in mind, this may not workable when the tested cable is with two end.

During the process you should always keep in mind to start with the OTDR set for the shortest pulse width for best resolution and a range at least twice the length of the cable you are testing. Make an initial trace and see how you need to change the parameters to get better results.

OTDRs can used to detect almost any problems in the cable plant caused during the installation. If the fiber of the cable is broken, or if any excessive stress is placed on the cable, it will show up the end of the fire much shorter than the cable or a high loss splice at the problem locations.

Except OTDR testing, the source and optical power meter method is another measurement which will test the loss of the fiber optic cable plant directly. The source and meter duplicate the transmitter and receiver of the fiber optic transmission link, so the measurement correlates well with actual system loss.


                   View: www.fibercasa.com for more information

2015年4月20日星期一

Do You Really Understand Fiber Optic Cable?

An optical fiber cable is a cable containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed. Different types of cable are used for different applications, for example long distance telecommunication, or providing a high-speed data connection between different parts of a building.


Fiber optic cables carry communication signals using pulses of light. While expensive, these cables are increasingly being used instead of traditional copper cables, because fiber offers more capacity and is less susceptible to electrical interference. So called Fiber To The Home(FTTH) installations are becoming more common as a way to bring ultra high speed Internet service to residences.


Figure1 

FiberCasa provides high quality FTTx butterfly cable. FTTx butterfly cable is commonly used in the indoor optical network construction. The standout anti-tensile and anti-pressing force makes it the most popular type of indoor optical cables in the indoor construction environment. The special metal strengthen member provides a large tensile and pressing force so that it is more durable than a common FTTx fiber. Composed with G.657A optical fiber, high quality LSZH jacket and special metal strengthen member makes it durable and reliable.


Figure2

FiberCasa provides high quality self-supporting FTTx cable. The self-supporting cable is commonly used in the outdoor optical network construction. Compared with a traditional FTTx fiber, the self-supporting FTTx cable has a extra steel strengthen member to ensure the tensile force. Composed with G.657A optical fiber and high quality LSZH jacket makes it durable and reliable.


Where to buy fiber optic cable? 
As one of the best OEM fiber optic cble manufacturers, Fibercasa provides a wide range of quality optical fiber cables with detailed specifications displayed for your convenient selecting. Per meter price of each fiber cable is flexible depending on the quantities of your order, making your cost of large order unexpected lower. Customers can also have the flexibility to custom the cable plant to best fit their needs. Only fiber cables that meets or exceeds industry standards is used to ensure quality products with best-in-class performance.

View: www.fibercasa.com or www.fiber-optic-fusion-splicer.com
 for more information

Mini OTDR














The mini Optical Time Domain Reflectometer(OTDR) is the new generation of intelligent equipment for testing fiber optic communication systems. Compact design with new OS makes it more portable and easier to operate. Whether detecting link layers in the construction and installation of optical network or processing efficient maintenance and trouble shooting, FHO2000 is your best assistant.

Features
- Wavelength 1310/1550nm, Dynamic Range 35/33dB, Dead zone 1/6 m
- Averaging/real time measuring modes
- Warnning function helps proctect OTDR damaged by online optical signal
- Integrated with Screenshot function
- Support multi-language display and input
- With large internal memory to save 20000 curves
- Provide data simulation software to process, generate and print report
- Long working hours for outdoor operation

Package includes
- Main unit
- 12V power adapter
- Lithium battery
- FC adapter
- USB cord,
- User guide
- CD disk
- Carrying case


see more in : www.fibercasa.com


2015年4月16日星期四

Fibercasa

Fibercasa founded in 2012. is a leading enterprise professionally engaged in the service of optical fibre assessing and networking. It is also one of the biggest national suppliers for optical communication meters and equipments. The products enjoy a worldwide reputation.


As an e-commerce company in the optical fibre, Fibercasa has been in the industry for more than 19 years. We have high standard in product manufacturing and foreign trade; and has accumulated ample logistical experience in international transportation. We aim to provide our customers with the product they need in a most competitive price.

What Fibercasa Offer                                         Categories          
  • PON design and construction of the related products.                 OTDR                
  • PON maintenance and related services.                                      Fusion splicer
  • FTTx ODN distribution solution.                                                   Power meter
  • Optical component inspection and related products.                   SFP Transceiver
Mini OTDR Introduction Fibercasa mini OTDR (Optical Time                   
Domain Reflectometer) is the new generation of intelligent            
 meter for the detection of fiber communications systems              
 after FCOT2000 series. With the popularize of optical                    
network construction in cities and countrysides, the 
measurement of optical network became short and
 disperse, This Mini OTDR is specially designed for that…

Mini OTDRs

Introduction to Mini OTDRs The latest developments
 in OTDRs in the widespread availability of small,
 battery-operated units that offer similar capabilities
 (and sometimes MORE) which previously could only
 be found in full sized models. The only limitation of a
 Mini is the lack of a built-in printer. This is offset by the 
good long-range and… Read More »



About us

Fibercasa.comLtd
6f, Building 13, No.99 Tianzhou Road
Tel: 86-21-54451216

Web: http://www.fibercasa.com