2015年8月13日星期四

Cloud Carriers and Cloud Providers: Enemies, Friends or “Frenemies”?



Any given cloud user is dependent upon both the cloud provider running the data center that is hosting the application, and one (or more) network service providers or carriers used to reach the cloud. If the cloud is “down”, meaning the user can’t access the cloud application, whose fault is it? Who is responsible for fixing the problem and who does the user complain to? If we aren’t careful, problems can quickly turn into a finger-pointing exercise that makes no one happy.

One thought is to set up a clear contractual relationship between the carrier and provider. The cloud provider buys access to the users from the carrier. The carrier, in turn, provides a traditional service-level agreement (SLA) to the cloud provider covering availability, loss, latency and jitter measured from locations in close proximity to the user and the data center. This establishes a clear division of responsibility and clean, measurable criteria for determining whether the carrier is living up to the terms and conditions. However, it doesn’t fully solve the finger-pointing problem, because even if the data center and the servers are working fine, and the carrier connections to the data centers are running perfectly, users still may not be able to access the cloud.

Another possibility is to eliminate the distinction by having the cloud carrier buy a cloud provider, as Verizon bought Terremark, or the other way around, as Google bought their own fiber. This way, the cloud customer can buy cloud services from a single organization running both the data centers and the network. This reduces any finger pointing from the customer, but if the organization is internally siloed, the same old problems can persist. Besides, the number of cloud carriers in relation to the number of cloud providers is such that no single enterprise can be large enough to own everything, not even Google.

The way out of this mess is for cloud carriers and cloud providers to collaborate and move up the stack. They need to test the service as the users see it, rather than the circuits as the carriers provide them, and also test the virtual machines in the data center as the cloud provider manages them. If the service being stored is cloud storage, the storage should be tested. If the service is a platform for running websites, the websites should be tested. If the service is an application like email, the application must be tested. However, these tests should not be local tests from the data center; in order to test the service effectively, testing must be performed from locations as close as possible to users. These locations are buried deep within the carrier’s network, out-of-reach to cloud providers.

To make the collaborative effort work, new kinds of business relationships will probably need to be established between cloud carriers and cloud providers, i.e., relationships that are cooperative as opposed to the adversarial seller/buyer relationships governed by SLAs. For instance, relationships in which the carrier accepts responsibility for testing the service the cloud provider sells, and in which the carrier and provider share test results honestly and in real time. In such relationships, both organizations’ operations staffs would work together to solve problems.

So, how do we evolve to this collaborative model in which cloud carriers and providers work together? The obstacles are not technical, as effective solutions are already available from Fibercasa and others. The answer lies in cloud carriers and cloud providers getting together to establish a viable business model enabling them to cooperate effectively. Business partnerships are based on equal relations, in which the parties involved are neither friends nor enemies.

If you'd like to learn more about testing cloud services, you can read Testing the Cloud white paper. You can also watch the Network Forecast - Mostly Cloudy webinar that I've recently co-hosted with my colleague Bruno Giguère  about the cloud and its many benefits, including reduced capital and elimination of the time, space, power and cost constraints that plague the traditional computing environment.






2015年8月12日星期三

RMB devaluation will help China or not ?

People's Bank of China (PBC) said that the improving US economy was one of the factors weighted in its decision to devalue the yuan.
"The US economy is recovering and markets are expecting at least one interest rate hike by the FOMC (Federal Open Market Committee of the Federal Reserve) this year", a PBC spokesperson said on the bank's website on Tuesday.
The PBC also said that strengthening dollar valuation is pushing down against the Euro and Yen.
China's large trade surplus has put the yuan's (RMB) real effective exchange rate in a relatively strong position, which is not entirely consistent with market expectation, the central bank said.
"Therefore, it is good time to improve quotation of the RMB central parity to make it more consistent with the needs of market development", the spokesperson added.
According to Amy Yuan Zhuang, a senior analyst at the Nordea financial services group, Beijing has previously steered clear of devaluing the yuan because it did not want to risk volatility in both the stock and currency markets.
"If the CNY trading band is to be widened, the aim would be to show progress on financial reform", she said.
Showing progress on financial reform, flexibility, and that Chinese markets can weather crises is critical to Beijing's aim of being included as a global currency reserve.
Earlier in the year, Chinese Premier Li Keqiang said:"China will speed up the basic convertibility of yuan on the capital account and provide more facility for domestic individual cross-border investment and foreign institutional investment in China's capital market."
The International Monetary Fund, which holds the key to the Chinese yuan becoming an international reserve currency through a review of its Special Drawing Rights (SDR) basket, visited Beijing this summer for technical discussions.
The 1.9 per cent downward move by the central bank was its biggest one-day change since 1993 -- and since China abandoned its tight currency peg for a managed float in 2005. It pushed the renminbi's "daily fix" to Rmb 6.2298 against the dollar, compared with a Rmb 6.1162 rate the day before. Before Tuesday, the biggest shift this year had been a 0.16 per cent adjustment.
The People's Bank of China said the move was a one-time adjustment to reflect changes in the way it calculates the daily fix -- the rate at which the central bank sets the currency every morning and from which the currency is allowed to move as much as 2 percentage points in either direction.


2015年8月6日星期四

10,000 Hours the Link Between the Beatles and a Telecom Text Exper

10,000 Hours the Link Between the Beatles and a Telecom Text Expert

An increasingly critical part of our service to operator and managed service clients is consultation on test strategy, and helping to devise appropriate methods and procedures that drive on-time and under-budget project delivery. Time and again, the same key challenge arises: how to minimize OPEX spending. It's a critical question for most operators, given that the ratio in their published CAPEX/OPEX spending is 1:4 (this rises as high as 1:10 in the initial years of longer ROI business cases, such as FTTx). Addressing this challenge successfully in our domain of testing during the construction, activation and troubleshooting phases has a direct impact on key project metrics, including first time right (FTR), number of repeat visits/truck roll, lead to cash, and customer satisfaction levels resulting in increases average revenue per user (ARPU) and reduce churn.

In addressing our clients' need to address OPEX challenges, I usually steer the meeting slightly off-course by engaging in a discussion about The Beatles. This may seem completely irrelevant, but bear with me. My own experience in supporting many successful deployment and upgrade projects has led to the insight that a key success factor lies in developing the expertise of the telecom engineers that we are asking to deploy, commission and maintain our next-generation networks. In our field, the ability of devise appropriate test plans, methods and procedures is just one side of the equation: without a expert engineering force, these projects will be marked by setbacks, delays and budget overruns. The classic root cause discussion pertaining to such unsuccessful projects usually pinpoints this lack of expertise, confirming that engineers do not have enough training/knowledge to accomplish their tasks right the first time.

Like me, I'm sure you have met with many genuine and self-styled experts along the way. However, I wonder if you are curious as to what in fact really makes an expert an expert, and perhaps more importantly, how the formula can be mass produced and bottled to serve our own needs?

My own research led me to an outstanding story about high achieves in sports, music and industry. In his book Outliers: The Story of Success, author Malcolm Glad-well frequently refers to the "10,000-Hour Rule", stating quite simply that mere talent and training are not enough, and that the key to success in any field is dependent upon prolonged and deliberate practice of the art, skill or discipline in question within the right environment, and that these factors are what really differentiates the highest performers. To a large extent, this equates with practicing the said task for an estimated 10,000 hours (i.e. , 5 years of hard labor working 6 days a week, and 8 hours a day). Of the many examples in the book, the reference that I would like to draw your attention to is that involving The Beatles. When the band got its initial "break" and went mainstream, the four band members hadn't just met that same day and set about to writing and performing the hit songs that propelled their rise to fame. In actual fact, they spent year playing the circuits in UK, Holland and Germany, perfecting their art individually and together as a band. They logged their 10,000 hours in the clubs of Hamburg, developing the expertise that is both admired and envied in equal measure. On reflection, it makes perfect sense-expertise is born not only of talent and knowledge, but also of the deliberate application of these skill over time, leading to complete mastery of one's subject.

Back to next-generation telecom deployment. It is easy to see why so many projects run over time and budget. Training courses are great (but cost time and money); however, without the deliberate practice leading to "expertise", is it any wonder that there are so many issues with respect to training retention, or that so many unresolved issues lead to escalations and repeat truck rolls?

I would go so far as to say that the challenges remain the same, whether the company has ten engineers, or 1,000 to 10,000. The fact of the matter is that a lack of expertise in the field force hurts, and very badly. From a telecom contractor supporting cell-tower applications (moving from testing low-speed TDM services to 10G Ethernet services) to a large incumbent operator deploying FTTx (moving from their legacy xDSL residential network), the key challenge seen time and again is not in the field engineers, who are already "experts" in one area, but who suddenly find themselves faced with a need to rapidly absorb completely new technologies with a completely different set of standards, tools and methodologies.

Happily, that's where Fibercasa can provide relief and support, as we've placed our "10,000 hours" inside the box. Functionality and technical compliance are critical elements when selecting a test solution, but our secret sauce is that we deliver these solutions in such a way that engineers are able to quickly pick up and start utilizing them in an expert manner, and right the first time. There is no magic formula here enabling us to reduce learning and retention curves to zero. However, in partnership with many clients, we have developed and all of this expertise is readily available to be applied to your own projects today. For example, an engineer with 30 minutes of training can pick up an Fibercasa OTDR and, via the iOLM application, characterize an optical link in 20 seconds with the same level of accuracy that a 30 year veteran would be able achieve in 10 minutes with a traditional tool. That's the result of our 10,000 hours--right inside every iOLM, and ready to go, now.

I'd like to leave an open invitation to my colleagues to respond to this blog by sharing HOW they personally contribute to delivering 10,000 hours toward the development of solutions and applications such as iOLM (optical fiber), SmartR(VDSL), WMDi (DWDM and TravelHawk Pro (3G/LTE deployment). Meanwhile, when working with Fibercasa to address your OPEX challenge, feel free to ask us to show you how our 10,000 hours can be found inside the box. You will be surprised!

View: www.fibercasa.com or www.fiber-optic-fusion-splicer.com
for more information


2015年7月29日星期三

Bandwidth in the Building...A New Approach

Bandwidth in the Building...A New Approach

Fiber-to-the-home (FTTH)has been around for many years now, and is in many aspects a very mature market and technology. The prices have of course come down over the years, and this technology is now attracting interest in a totally different market space.

Cabling of buildings has historically been accomplished using copper. But, what if new builds were to boast fiber instead of copper, being based on the mature, low-cost FTTH technology, i.e. , PON? In many cases, fiber is now less expensive and easier to install than similar copper infrastructures.

More and more, this is exactly what we are starting to see, and the practice is referred to as passive optical local area network (PO-LAN), or POL for short. This is of course fueled by the ever-increasing demand for highly cost-effective and high-quality voice, video and data in the enterprise space.

POL replaces aggregation electronics and copper cables with passive optical splitters and single-mode fibers. This creates an architecture with lower purchase, installation and maintenance costs, in addition to a far longer life span than traditional copper architectures. One of the incentives for POL is that it is a cost-effective fiber-to-the-desktop enterprise solution that is changing the network and the way that we think about designing, installing and maintaining the network. POL is referred to as passive, because there is no need for active electronics between the main equipment room and the work areas, but rather just passive optical splitters that distribute converged services directly from main switch to the terminals (without using electricity). This architecture promises to bring high performance (gigabit) broadband to the desktop at a fraction of the cost of typical copper-based Ethernet LAN configurations.

A second incentive is the technology’s proven track record - with its roots in FTTH, POL offers true carrier - class robustness and reliability. However, that doesn’t mean you should deploy FTTH technology designs into your LAN. FTTH infrastructure was designed to maximize splitter use for low-density, static environments like neighborhoods and apartment buildings. Enterprise environments like office buildings and campuses require cabling system infrastructures designed for higher density and ongoing moves, adds and changes (MACs).

A study titled “Transformation of the Enterprise Network using POL” carried out by Networks Strategy Partners mentions that if a single-building office were to replace its network with a POL, that office would end up cutting its CAPEX by 39% and its OPEX by 52%, for a total cost-of-ownership (TCO) saving amounting to 45%. If a multibuilding campus were to employ a POL, the savings would amount to 41% in terms of CAPEX and 71% in terms of OPEX, which represents a TCO of 54%.

The image below, which is pulled from the Association for Passive Optical LAN, highlights these differences:

From a testing standpoint, this remains a very-short reach PON architecture. As such, with technology offering such as the intelligent Optical Link Mapper(iOLM), EXFO is uniquely well-positioned as a testing partner. To learn more about these solutions, visit our Passive Optical LAN page.

for more information

2015年7月28日星期二

Comparison of Fujikura FSM-80S and FSM-60S

Comparison of Fujikura FSM-80S and FSM-60S

Fujikura fusion splicing machine, a world leader in manufacturing of optical splicer has released the latest unit with wind-protector from dust, moisture, and mechanical damager. Fujikura FSM-80S designed for speed, reliability and security, this Fujikura 80s replaces the previous model Fujikura – 60S.
The new design of automatic windproof cover and stove for heat shrinkage CRSS provides record levels: splicing for 7 seconds and shrinking in just 14 seconds. In the splicing apparatus Fujikura 80S (FSM-80S) uses a new Li-Ion battery, which has no memory effect and can be used at low temperatures.
The new design of the case, the operator can begin work on the optical splicing machine immediately after opening the lid.

The new mechanism allows for quick fastening of a cover to remove it and set aside. Large color LCD screen allows you to work in direct sunlight and protected from bumps and bruises special transparent plate. Built in the menu of the device user guide quickly prompt the user to proceed.
The new device, like fusion splice fujikura 60s is to align the fiber core (method PAS) and can splice all types of optical fibers, including and insensitive to bending fiber standard G657.
In addition to protecting against dust and moisture, Fujikura 80S (FSM-80S) is protected from bumps and falls on all six sides! Such a possibility does not have any more one welding machine in the world.

The main features of Fujikura 80S (in comparison with the FSM-60S)

-New Li-Ion battery now allows you to make up to 200 splicing cycles-shrinking

-High speed welding of fiber (7c for single-mode fiber)
-High speed shrink (14c CRSS 60mm)
-Increased lifetime of electrodes – up to 3000 splices
-Splicing with a length of just 5mm cleavage for use with any welded connectors or for micro-CRSS (20mm, 30mm)
-Review System without mirrors
-Automatic closing windproof lid when downloading and opening the fiber at the end of the welding
-The device is designed to operate in the most demanding conditions, has a high level of protection against dust and moisture, is not afraid of bumps and falls, ensures operation in temperatures ranging from -10 ° C to + 50 ° C.
The device is perfectly demonstrated in tests with the drops from six different positions from a height of 75 centimeters.
Thanks to the speed Fujikura 80S , with its use eliminates the need for additional stove for heat shrinkage CRSS, which is used in older welders. In addition, for special work in the laboratory and industrial conditions provided for connection to the welding machine or a second stove termostrippera.
If you are interested in FSM - 80S, 
view: www.fibercasa.com for more information.








Reducing friction in fiber microducts to speed blowing deployments

Reducing friction in fiber microducts to speed blowing deployments


When it comes to deploying fiber, network planners have the options of blowing, pulling or pushing the cable. Each of these methods has different strengths and weaknesses, as we've covered in previous blogs.

Generally, for the last drop pulling or pushing delivers the fastest, most efficient deployment -- without needing to spend time setting up expensive and potentially messy blowing machines.

However, as you move towards the network backbone and, consequently, have to cover longer distances, blowing becomes a more feasible option -- particularly if you have already invested in the equipment and skills needed to deploy it effectively.



How blowing works

When cable is blown through a microduct using compressed air, the propulsion comes from the pressure gradient caused when high pressure (in the blowing head) decays to atmospheric pressure at the route end. 

The force this imparts to the cable is related to the gradient of the pressure versus distance plot (as shown in the graph). The gradient has a very small magnitude at the start of the route but a much large magnitude at the route end.

Therefore, blowing distance is directly related to the weight of cable, the pressure used, and friction from the microduct liner. The first two of these are very visible -- you can feel the weight and see the pressure on the blowing machine's gauge. 

Often, the contribution of the microduct liner is overlooked as it is hidden away, but it would be wrong to assume that every liner is equal in performance. Factors such as static build up in the microduct, caused by the liner, can severely limit the distance cable can be blown -- and the speed that is achieved. 

Keeping it slick

We carried out a major project for a large incumbent European telco, where the liner properties were vital to its success. The operator was rolling out a fiber to the cabinet (FTTC) network, and had tight deadlines and budgets to meet.

It needed to deploy fiber over long distances, and wanted to optimize the use of its blowing machines and crews, so they could complete more work per day. The cable weight was fixed, and it knew the maximum pressure that its blowing machines could produce -- the only way to improve efficiency was to look at the microduct liner. 

Consequently, it ran a series of trials, looking at a range of liner materials and their properties. These included m2fx's patented low static, low friction DVC liner. By making the blowing (or pushing process) easier, DVC enables cables to travel further, or crews to use less pressure to get the same results, reducing strain on equipment.

The third party run trials were carried out around the operator's 1.5km (1 mile) and 2km test tracks, using an industry standard blowing machine. Liners were tested on 8 and 12 microducts, under real - world conditions, and the results were clear. Microducts from three different manufacturers, including m2fx, were used, in combination with fiber cables from two leading suppliers.

Using m2fx microducts, with the DVC liner, delivered better performance across every combination of microduct size and cable. Overall, it provided up to 50 per cent greater blowing distance than the nearest competitor and was also 35 per cent faster when it comes to installing fiber over specific distances. The design of several other microducts seemed to actually encourage static build up, harming their performance.

Some key results were:

  • Using cable manufacturer number one, 8 fiber cable within m2fx microduct was blown 1,600 (1 mile) in under 60 minutes - compared to 68 minutes for the nearest competitor and 67 minutes for the third.
  • Using cable manufacturer number two, 8 fiber cable within m2fx microduct was blown 2km in just under 70 minutes - compared to 1,100m in 78 minutes and 950m in 60 minutes for rivals. Essentially, the two competitors couldn't even complete the test as they didn't get to the end of the route.
  • In a further trial, looking at different size microducts, 8 fiber cable within m2fx microduct was blown 1,600m in 42 minutes. This was nearly twice as fast as the competition, which achieved the same distance in 80 minutes.
  • 12 fiber cable within m2fx microduct was blown 1,600m in just 30 minutes, under 12 bar pressure.
Having then selected m2fx, the operator is benefiting from faster, longer, blown installs, which is directly leading to reduced deployment time and costs. There was no need for any additional training of crews or extra hardware, enabling the operator to maximize its existing investment in blowing machines.

The deployment is still ongoing, but has already successfully fibered up substantial parts of the country, bringing the power of fiber to millions of homes and businesses and enabling the operator to introduce new high speed services to its customers. This is all helped by the low friction liner, hidden within the microducts - demonstrating that not all liners are created equal, and that they can make an appreciable difference to performance, whatever cable you are using.


for more information






















2015年7月24日星期五

Why Do We Need Optical Fiber to Get to the “Cloud” ?

Why Do We Need Optical Fiber to Get to the "Cloud" ?

In the past several decades, technologies have evolved almost immeasurably, certainly including the development of data storage. Humankind has always tried to find ways to store information. People have become accustomed to technological terminology, such as CD-ROM, USB Key, and DVD. But today, the most advanced storage solution may be the cloud computing. About how to achieve the "cloud", some people say that optical fiber is the key to cloud computing. So, what is cloud computing and why do we need optical fiber to get there? Today, we are going to the "Cloud" and find the out answer.


What Is Cloud Computing and Why Is It Called as "Cloud"?

Though the term "cloud computing" is everywhere and closely linked with our life, we do not really know what it is just like many terminologies that we don't know. However, unlike other terminologies, we are more interested in cloud computing because of its attractive features, applications or maybe the interesting name. Why is it called as "cloud" but not "rain" or "snow"? The most simple explanation is that we usually use "cloud" to represent the network. "Cloud" the term describes an image of the complex infrastructure, which cover all the technical details. Obviously, the cloud computing has nothing to do with the weather "cloud". It is just an analogy to give it a body to imagine. In fact, cloud computing is a model for computing transforming. In this model, data and computation are operated somewhere in a "cloud", which is some collection of data centers owned and maintained by a third party. This enables ubiquitous, convenient, on-demand network access to a shared pool of configurable computing resources that can be rapidly provisioned and released with minimal management effort or service provider interaction.

There are public cloud, private cloud and hybrid cloud. When a cloud is made available in a pay-as-you-go manner to the general public, we call it a public cloud. And when the cloud infrastructure is operated solely for a business or an organization, it is called private cloud. A composition of public and private cloud is called hybrid cloud. A hybrid cloud integrates the advantages of public cloud and private cloud, where private cloud is able to maintain high service availability by scaling up their system with externally provisioned resources from a public cloud when there are rapid workload fluctuations or hardware failures.

Generally, cloud computing may be considered to include the following layers of service: IaaS (Infrastructure as a Service), PaaS (Platform as a Service) and SaaS (Software as a Service).

  • IaaS (Infrastructure as a Service) - Offering web-based access to storage and computing power. Consumer can get service from a full computer infrastructure through the Internet.                                                     IaaS Examples: Amazon Web Services (AWS), Microsoft Azure, Google Compute Engine (GCE), Joyent.
  • PaaS (Platform as a Service) - Giving developers the tools to build and host web applications.                                                                       PaaS Examples: Apprend, Microsoft Azure.
  • SaaS (Software as a Service) - Applications that are accessible from various client devices through a thin client interface such as a web browser.                                                                                             SaaS Examples: Google Apps, Salesforce, Workday, Concur, Citrix GoToMeeting, Cisco WebEx.

Optical Fiber Is the Key to the "Cloud"

The implementation of cloud computing depends on high bandwidth. If without an enough bandwidth, cloud computing is impossible. In the "cloud", users' terminals are simplified into a pure and single device with only input and output functions but meanwhile utilize the powerful computing and processing functions from the "cloud". This means that the terminal must have a very fast connection, because the simple terminal means fast network and powerful platform requirement, where "pipes" are put forward higher requirement. Thus, fiber is the ideal "pipe" for cloud computing.

In fact, increasingly more computer applications, software and even file storage now reside on the Internet or in the "cloud". Yet another driving force is mobile Internet traffic, which relies heavily on cloud computing. It is said that there is over 1 Exabyte (i.e. 1,073,741,824 Gigabytes) of data currently stored in the that will limit your ability to work seemlessly in the "cloud" is your Internet connection. Thus, to access the tremendous amounts data we need fiber networks that can carry Terabits - one trillion bits per second. Optical fiber can offer more available bandwidth and speed which meets the demands of the "cloud". Obviously, no technology is more effective at meeting that challenge than fiber at present.

FTTH and Cloud Computing

When talking about optical fiber, FTTH (Fiber to the Home) may be the hot topic. FTTH infrastructure is expected as a solution to the growing demands for high bandwidth. It brings fiber-optic connections directly into homes, allowing for delivery speeds up to a possible 100 Mbps, or even more. These speeds open the door to a variety of new services and applications for residential, business and public service markets. The relationship between FTTH and cloud computing is subtle. FTTH which will encourage growth in cloud computing with its benefits. And the growth of cloud computing may drive the development of FTTH.

The Future

Cloud computing is seen by many as the next generation of information technology. The abundant supply of information technology capabilities offers many benefits to our lives. However, like any new technology advancement, cloud computing also faces many challenges, e.g. cloud security. Though there are many unknown factors in the "cloud" waiting for us to explore, it is no doubt that we need optical fibers in order to better reach the "cloud". Now, with the benefits of optical fibers, the cloud computing is increasingly developing. Will it automatically work out better and cheaper for you in the long term? What's your opinion?

for more information.